Designing Magnets...

Here at Chalk Line, we’re happy to help design your magnet. If you’ve never designed anything with Chalk Line before, here’s how it works:  

Submit your order information, along with your picture you’d like to use for the magnet and your text on the order form. For the text, most folks will include their name, ministry, ministry logo, a short tagline, and their contact information, but you’re welcome to include more or less – it’s up to you!

Give us 1-2 days to put together a proof – we’ll send a PDF proof back to you for you to review, and you can make as many changes as you need before we print. Send your changes via e-mail, and we’ll reply back with the corrected pdf proof as soon as we’re able.

Once you’ve got a design that’s ready to print, let us know you’re ready to put the magnet order in line to print. We’ll have your order details from the order page, and we’ll get started as soon as possible.

If you’re ready to try your hand at designing your own magnet, remember that we’ve got some design requirements that need to be met when putting the magnet together. The two most important requirements are these:

1. Use a high resolution photo (300 dpi or higher) for your magnet
2. Make sure to create your magnet with the correct “bleed” room – we require .125” bleed room from the edge and an additional .25” safe zone to ensure that nothing important is cut off when we create the magnets.

You can use our “how-to” guide available here to help guide you through the magnet set-up process. If you’re in doubt, send the magnet proof to tiffany@chalkline.org and we’ll let you know if your magnet is print-ready. J

If you have any questions about the design process, just let us know. We're excited to see what you put together!